Author Topic: Modification to increase output  (Read 349 times)

David Houck

  • club
  • Senior Member
  • *
  • Posts: 12485
Modification to increase output
« on: July 10, 2006, 01:32:09 PM »
Mica has posted a modification to increase the output of Distillate basses.  (Note that in the picture someone has previously cut the pickup leads and resoldered them; so ignore that little detail.)  Mica's post can be found here; it's the picture with the yellow and green arrows.  The modification involves soldering two 2.7k resistors to the printed circuit board.  At the moment, I don't know if this applies to all Distillate basses, but if you are having a problem with low output, it might be worth looking into.