Author Topic: SF-2 >F-1x > power amp chain advice needed....  (Read 240 times)

Bassman8416

  • club
  • Advanced Member
  • *
  • Posts: 385
SF-2 >F-1x > power amp chain advice needed....
« on: July 13, 2017, 06:18:54 AM »
hey folks,
 I have searched and read some suggestions. But I ended up a little more confused....I will be using the Sf-2 mono....I want to be able to have the sf-2 in the system when the sound man runs from the direct out of the F-1x.  Sf-2 into F-1x to the power amp?
thank you kindly for your patience .

willie

  • club
  • Advanced Member
  • *
  • Posts: 294
Re: SF-2 >F-1x > power amp chain advice needed....
« Reply #1 on: July 13, 2017, 07:17:39 AM »
Put the SF-2 on the effects loop of the F-1X.      F-1X Effects send into SF-2 mono input. SF-2 mono output into F-1X effects return

Bassman8416

  • club
  • Advanced Member
  • *
  • Posts: 385
Re: SF-2 >F-1x > power amp chain advice needed....
« Reply #2 on: July 13, 2017, 07:26:18 AM »
Put the SF-2 on the effects loop of the F-1X.      F-1X Effects send into SF-2 mono input. SF-2 mono output into F-1X effects return
So I would run the  F-1x to Ch A/in on the Sf-2 and then out from Ch B/out back to F-1x return. Plugging the bass directly into the
F-1x ?
« Last Edit: July 13, 2017, 07:30:54 AM by Bassman8416 »

elwoodblue

  • club
  • Senior Member
  • *
  • Posts: 2081
Re: SF-2 >F-1x > power amp chain advice needed....
« Reply #3 on: July 13, 2017, 11:21:44 AM »
Put the SF-2 on the effects loop of the F-1X.      F-1X Effects send into SF-2 mono input. SF-2 mono output into F-1X effects return
So I would run the  F-1x to Ch A/in on the Sf-2 and then out from Ch B/out back to F-1x return. Plugging the bass directly into the
F-1x ?


Yep. that's the ticket ;)

mica

  • alembic
  • Senior Member
  • *
  • Posts: 8931
Re: SF-2 >F-1x > power amp chain advice needed....
« Reply #4 on: July 13, 2017, 05:42:51 PM »
Just watch your gains! Keep the levels really low while you are experimenting.